| |
|
|
|
| |
PAC011-
General Purpose Control Board |
|
| |
|
|
|
| |
The PAC011 is a fully featured single
board computer using Motorola's MC68376 32-bit microcontroller. The
board has a rich set of hardware features to enable it to control
a variety of applications, test rigs, general prototyping etc. |
|
| |
- Powerful Motorola 32-bit
MC68376 microcontroller, using the CPU32 instruction set. Programmable
up to 20 MHz.
- 1 Mbtye Flash memory
16 bits wide for program storage.
- 128 Kbyte x 8 battery
backed SRAM.
- 64 Kbyte x 8 serial
EEPROM for long term data storage.
- Real time clock /
calendar.
- 24 digital inputs,
individual link selectable to switch PNP or NPN.
- 24 digital outputs.
All outputs PNP, Drive capability 4 amps per 4 channels.
- 4 channels 0-10 volt
(link selectable 0-20ma) analogue inputs.
- 4 channels 0-10 volt
analogue outputs.
- 3 Serial communication
channels. Individually selectable for RS232, RS485 full duplex,
RS485 half duplex.
- 1 channel CANbus interface
at 1 Mbits/second. Full implementation protocol CAN 2.0 A and
B.
- 10 way Motorola recommended
BDM header for development support in 68000 assembler or 'C'
languages. Addition of PAC018 debug board allows full program
debugging, hardware breakpoints etc. via PC.
- On board support for
programming on-board Flash memory via PC COM port.
- Direct interface to
2 PAC003 vibrator drive boards, PAC013 and PAC017 digital input
/ output daughter boards.
- QSPI interface to PAC012
LCD display / keypad.
- All interfaces fully
opto-isolated.
- Single 24 volt supply.
Reverse voltage protected.
- All connectors simple
screw terminal blocks, 5.08 mm pitch.
|
 |
|
| Board size 210 x
297 mm (A4) |
| |
| |
| |
| |
| |
| |
|
